R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

255
[RouterB] ip route-static 192.168.74.0 24 192.168.212.161
[RouterB] ip route-static 192.168.99.0 24 192.168.212.161
3. Configure OSPF between Router B and Router C, and configure OSPF on Router B to redistribute
static routes:
# Configure OSPF to advertise the local network, and enable OSPF to redistribute static routes on
Router B.
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 172.17.100.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] import-route static
[RouterB-ospf-1] quit
# Configure OSPF to advertise local networks on Router C.
[RouterC] ospf
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] network 172.17.100.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] network 10.220.2.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Display the IP routing table on Router C.
[RouterC] display ip routing-table
Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost NextHop Interface
3.3.3.3/32 Direct 0 0 127.0.0.1 InLoop0
10.220.2.0/24 Direct 0 0 10.220.2.16 S2/2/0
10.220.2.16/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
172.17.100.0/24 Direct 0 0 172.17.100.2 S2/2/1
172.17.100.2/32 Direct 0 0 127.0.0.1 InLoop0
192.168.64.0/24 O_ASE 150 1 172.17.100.1 S2/2/1
192.168.74.0/24 O_ASE 150 1 172.17.100.1 S2/2/1
192.168.99.0/24 O_ASE 150 1 172.17.100.1 S2/2/1
The output shows that Router C has learned routes to 192.168.64.0/24, 192.168.74.0/24, and
192.168.99.0/24 through OSPF.
4. Configure BGP between Router C and Router D, and configure BGP on Router C to redistribute
OSPF routes:
# On Router C, enable BGP, specify Router D as an EBGP peer, and configure BGP to redistribute
OSPF routes.
[RouterC] bgp 65106
[RouterC-bgp] router-id 3.3.3.3
[RouterC-bgp] peer 10.220.2.217 as-number 64631
[RouterC-bgp] import-route ospf
# Enable BGP, and configure Router C as an EBGP peer on Router D.