R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

303
Ste
p
Command Remarks
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable the split horizon
function.
ripng split-horizon
Optional.
Enabled by default.
Configuring the poison reverse function
The poison reverse function enables a route learned from an interface to be advertised through the
interface. However, the metric of the route is set to 16, which means the route is unreachable.
To configure poison reverse:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable the poison reverse
function.
ripng poison-reverse Disabled by default.
Configuring zero field check on RIPng packets
Some fields in the RIPng packet must be zero, which are called "zero fields." With zero field check on
RIPng packets enabled, if such a field contains a non-zero value, the entire RIPng packet is discarded. If
you are sure that all packets are reliable, disable the zero field check to reduce the CPU processing time.
To configure RIPng zero field check:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Enable the zero field check.
checkzero
Optional.
Enabled by default.
Configuring the maximum number of ECMP routes
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Configure the maximum
number of ECMP RIPng
routes for load balancing.
maximum load-balancing number
Optional.
By default, the maximum number of
ECMP RIPng routes is 8.