R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

371
Ste
p
Command Remarks
5. Apply a routing policy to
routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
Not applied by default.
The IPv6 BGP-VPN instance
view does not support the
ipv6-group-name argument.
6. Specify an IPv6 ACL to filter
routes advertised to an IPv6
peer or peer group.
peer { ipv6-group-name | ipv6-address }
filter-policy acl6-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
7. Specify an AS path ACL to
filter routes advertised to an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
as-path-acl as-path-acl-number export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
8. Specify an IPv6 prefix list to
filter routes advertised to an
IPv6 peer or peer group.
peer { ipv6-group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
NOTE:
IPv6 BGP advertises routes passing the specified policy to peers. Using the
protocol argument can filter
only the routes redistributed from the specified protocol. If no
protocol is specified, IPv6 BGP filters all
routes to be advertised, including redistributed routes and routes imported with the network command.
Configuring inbound route filtering
Only routes passing the configured filtering can be added into the local IPv6 BGP routing table.
Members of a peer group can have different inbound route filtering policies.
To configure inbound route filtering:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family view
or IPv6 BGP-VPN instance
view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
4. Configure inbound route
filtering.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
Not configured by default.
5. Apply a routing policy to
routes from an IPv6 peer or
peer group.
peer { ipv6-group-name |
ipv6-address } route-policy
route-policy-name import
Not applied by default.
The IPv6 BGP-VPN instance view
does not support the
ipv6-group-name argument.
6. Specify an ACL to filter routes
imported from an IPv6 peer or
peer group.
peer { ipv6-group-name |
ipv6-address } filter-policy
acl6-number import
Not specified by default.
The IPv6 BGP-VPN instance view
does not support this command.