R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

424
Ste
p
Command Remarks
3. Set the AS-PATH attribute for
BGP routes.
apply comm-list comm-list-number
delete
Optional.
Not set by default.
4. Delete the community attribute
of BGP routing information
using the community list.
apply comm-list { comm-list-number |
comm-list-name } delete
Optional.
Not configured by default.
5. Set the community attribute for
BGP routes.
apply community { none | additive |
{ community-number&<1-16> |
aa:nn&<1-16> | internet |
no-advertise | no-export |
no-export-subconfed } * [ additive ] }
Optional.
Not set by default.
6. Set a cost for routing
information.
apply cost [ + | - ] value
Optional.
Not set by default.
7. Set a cost type for routing
information.
apply cost-type [ external | internal
| type-1 | type-2 ]
Optional.
Not set by default.
8. Set the extended community
attribute for BGP routes.
apply extcommunity { { rt
route-target }&<1-16> [ additive ] |
soo site-of-origin additive }
Optional.
Not set by default.
9. Set the next hop.
• Set the next hop for IPv4 routes:
apply ip-address next-hop
ip-address
• Set the next hop for IPv6 routes:
apply ipv6 next-hop
ipv6-address
Optional.
Not set by default.
10. Set the IP precedence.
apply ip-precedence
ip-precedence-value
Optional.
Not set by default.
11. Inject routing information to a
specified ISIS level.
apply isis { level-1 | level-1-2 |
level-2 }
Optional.
Not configured by default.
12. Set the local preference for
BGP routing information.
apply local-preference preference
Optional.
Not set by default.
13. Set MPLS label.
apply mpls-label
Optional.
Not set by default.
14. Set the origin attribute for BGP
routes.
apply origin { egp as-number | igp |
incomplete }
Optional.
Not set by default.
15. Set the preference for the
routing protocol.
apply preference preference
Optional.
Not set by default.
16. Set a preferred value for BGP
routes.
apply preferred-value
preferred-value
Optional.
Not set by default.
17. Set the QoS-local ID.
apply qos-local-id local-id-value
Optional.
Not set by default.