R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

425
Ste
p
Command Remarks
18. Set a tag value for RIP, OSPF or
IS-IS route.
apply tag value
Optional.
Not set by default.
19. Configure FRR.
apply fast-reroute backup-interface
interface-type interface-number
[ backup-nexthop ip-address ]
Optional.
Not configured by default.
Configuring a continue clause
Follow these guidelines when you configure a continue clause:
• If you configure the same apply clause that set different values (including the apply community and
apply extcommunity clauses with the additive keyword) on nodes that are combined by the
continue clause, the apply clause configured on the last matching node takes effect.
• If you configure the apply community clause for multiple nodes that are combined by the continue
clause, the apply comm-list delete clause configured on the current node cannot delete the
community attributes set by preceding nodes.
To configure a continue clause for a routing policy:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create a routing policy and
enter routing policy view.
route-policy route-policy-name
{ deny | permit } node node-number
Not created by default.
3. Specify the next node to be
matched.
continue [ node-number ]
Optional.
Not configured by default.
The specified next node must
have a larger number than the
current node.
Displaying and maintaining the routing policy
Task Command Remarks
Display BGP AS path list
information.
display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display BGP community list
information.
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
Display BGP extended community
list information.
display ip extcommunity-list
[ ext-comm-list-number ] [ | { begin | exclude |
include } regular-expression ]
Display IPv4 prefix list statistics.
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]