R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

439
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IPv4 address
family view.
address-family ipv4 N/A
3. Create a topology and
enter topology view.
multiple-topology topology-name Not created by default.
4. Specify an ACL for the
topology.
acl acl-number N/A
5. Configure the
maximum number of
routes supported by
the topology.
routing-table limit number
{ warn-threshold | simply-alert }
Optional.
6. Return to system view.
quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable a topology on
the interface.
multiple-topology topology-name
enable
Not enabled by default.
Displaying and maintaining MTR
Task Command Remarks
Display the information
of a topology or all
topologies.
display multiple-topology
[ topology-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.