R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

85
Ste
p
Command Remarks
2. Bind OSPF MIB to an
OSPF process.
ospf mib-binding process-id
Optional.
The OSPF process with the smallest
process-id is bound with OSPF MIB
by default.
3. Enable OSPF trap
generation.
snmp-agent trap enable ospf [ process-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow | lsdboverflow |
maxagelsa | nbrstatechange | originatelsa
| vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit |
virnbrstatechange ] *
Optional.
Enabled by default.
Enabling message logging
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A
3. Enable message
logging.
enable log [ config | error | state ]
By default, the function is
disabled.
Enabling the advertisement and reception of opaque LSAs
With this feature enabled, OSPF can receive and advertise Type 9, Type 10, and Type 11 opaque LSAs.
To enable the advertisement and reception of opaque LSAs:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A
3. Enable the advertisement and
reception of opaque LSAs.
opaque-capability enable
Optional.
By default, the
function is disabled.
Configuring OSPF to give priority to receiving and processing
hello packets
To ensure OSPF runs correctly, a router receives and processes hello packets and other protocol packets
at the same time. When the router has established neighbor relationships with multiple routers, and the
routing table size is big, the router must receive and process large numbers of packets. In this case, you