R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

121
NAT server in private network information:
There are currently 2 internal server(s)
Interface: GigabitEthernet2/1/1, Protocol: 6(tcp)
Global: 202.110.10.10 : 80(www)
Local : 10.110.10.10 : 80(www)
Status: Inactive
Interface: GigabitEthernet2/1/1, Protocol: 6(tcp)
Global: 100.100.100.100 : 21(ftp)
Local : 1.1.1.1 : 21(ftp) vpn1
Status: Active
Table 27 Command output
Field Descri
p
tion
NAT server in private network
information
Information about internal servers.
Interface Internal server interface.
Protocol Protocol type.
Global
External IP address and port number of a server, and the VPN that the
external address belongs to.
Local
Internal network information about a server:
• For a common internal server, this field displays the internal IP address
and port number of the server, and the MPLS L3VPN to which the internal
IP address belongs.
• For an internal server in load sharing mode, this field displays the
internal server group name, the MPLS L3VPN that the internal IP address
belongs to, internal server member information, and the number of
current connections of each member.
Status Current status of the configuration, active or inactive.
Related commands
nat server
display nat server-group
Use display nat server-group to display configuration information about internal server groups.
Syntax
display nat server-group [ group-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-number: Specifies the internal server group number in the range of 0 to 31. If you do not specify
this argument, this command displays information for all internal server groups.