R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

124
Field Descri
p
tion
TTL
NAT session lifetime in the format of hh:mm:ss.
The HSR6800 routers cannot display information about NAT session lifetime.
Left NAT session remaining lifetime, in the format of hh:mm:ss.
display nat static
Use display nat static to display static NAT entries and interfaces with static NAT enabled.
Syntax
display nat static [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display static NAT entries and interfaces with static NAT enabled.
<Sysname> display nat static
NAT static information:
There are currently 2 NAT static configuration(s)
net-to-net:
Local-IP : 1.1.1.0
Global-IP : 2.2.2.0
Netmask : 255.255.255.0
Local-VPN : vpn1
Global-VPN : vpn2
Destination : 5.5.5.0
Destination Mask: 255.255.255.0
Out-interface : Vlan-interface200
Status: Active
single static:
Local-IP : 4.4.4.4
Global-IP : 5.5.5.5
Local-VPN : ---
Global-VPN : ---