R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

178
IPv6 basics configuration commands
display ipv6 fib
Use display ipv6 fib to display IPv6 FIB entries. If you do not specify any parameter, this command
displays all IPv6 FIB entries.
Syntax
display ipv6 fib [ vpn-instance vpn-instance-name ] [ acl6 acl6-number | ipv6-prefix ipv6-prefix-name ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Displays the IPv6 FIB entries of the specified MPLS L3VPN. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Without this option specified,
this command displays the IPv6 FIB entries for the public network.
acl6 acl6-number: Displays the IPv6 FIB entries permitted by a specific ACL. The ACL number is in the
range of 2000 to 2999. If the specified ACL does not exist, this command displays all IPv6 FIB entries.
ipv6-prefix ipv6-prefix-name: Displays the IPv6 FIB entries matching a specific prefix list. The
ipv6-prefix-name argument is a case-sensitive string of 1 to 19 characters. If the specified prefix list does
not exist, this command displays all IPv6 FIB entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The device looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static