R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

187
Examples
# Display the total number of neighbor entries acquired dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total dynamic entry(ies): 2
display ipv6 neighbors vpn-instance
Use display ipv6 neighbors vpn-instance to display neighbor information for a specific VPN.
Syntax
display ipv6 neighbors vpn-instance vpn-instance-name [ count ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance-name: Specifies the MPLS L3VPN for which neighbor entries are to be displayed. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
count: Displays the total number of neighbor entries in the specified VPN.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display neighbor information for the VPN vpn1.
<Sysname> display ipv6 neighbors vpn-instance vpn1
Type: S-Static D-Dynamic
IPv6 Address Link-layer VID Interface State T Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A GE2/1/1 REACH S -
Table 47 Command output
Field Descri
p
tion
IPv6 Address IPv6 address of a neighbor.
Link-layer Link layer address (MAC address) of a neighbor.
VID VLAN to which the interface connected with a neighbor belongs.
Interface Interface connected with a neighbor.