R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

198
Field Descri
p
tion
initiated dropped
Number of initiated but dropped connections (before SYN is received from
the peer).
Packets dropped with MD5
authentication
Number of packets that fail the MD5 authentication and are dropped.
Packets permitted with MD5
authentication
Number of packets that pass the MD5 authentication.
display tcp ipv6 status
Use display tcp ipv6 status to display the IPv6 TCP connection status, including the IPv6 TCP control block
address, local and peer IPv6 addresses, and status of the IPv6 TCP connection.
Syntax
display tcp ipv6 status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
*: TCP6 MD5 Connection
TCP6CB Local Address Foreign Address State
045d8074 ::->21 ::->0 Listening
Table 52 Command output
Field Descri
p
tion
*: TCP6 MD5 Connection
The asterisk (*) indicates that the TCP6 connection is secured with
MD5 authentication.
TCP6CB IPv6 TCP control block address (hexadecimal).
Local Address Local IPv6 address.
Foreign Address Remote IPv6 address.