R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

257
NAT-PT configuration commands
display natpt address-group
Use display natpt address-group to display NAT-PT address pool configuration information.
Syntax
display natpt address-group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display NAT-PT address pool configuration information.
<Sysname> display natpt address-group
IPv4 Address Pool Information:
1 : from 1.1.1.1 to 1.1.1.4
Table 66 Command output
Field Descri
p
tion
1 Address pool number.
from 1.1.1.1 Start IP address in an address pool.
to 1.1.1.4 End IP address in an address pool.
display natpt address-mapping
Use display natpt address-mapping to display the static and dynamic NAT-PT address mappings.
Syntax
display natpt address-mapping [ | { begin | exclude | include } regular-expression ]