R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

285
Field Descri
p
tion
Last 300 seconds output: 0
bytes/sec, 0 packets/sec
Average output rate in the last 300 seconds in bytes/sec or
packets/sec.
packets input Total number of input packets.
input error Number of input error packets.
packets output Total number of output packets.
output error Number of output error packets.
# Display brief information about interface Tunnel 0.
<Sysname> display interface tunnel 0 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Tun0 UP UP 1.1.1.1
# Display brief information about the interface Tunnel 1 in DOWN state.
<Sysname> display interface tunnel brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Tun1 DOWN Not connected
Table 74 Command output
Field Descri
p
tion
The brief information of
interface(s) under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status:
• ADM—The interface has been administratively shut down by the undo
shutdown command.
• Stby—The interface is a backup interface.
Protocol: (s) - spoofing
(s) indicates that the network layer protocol state is UP, but the link is not
available because it is either an on-demand link or not present at all.
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To bring it up,
perform the undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Protocol state:
• DOWN—The protocol is disabled.
• UP—The protocol is enabled.
Main IP Primary IP address of the interface.
Description Description of the interface.