R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

292
Default command level
2: System level
Parameters
number: Specifies the tunnel interface number.
Usage guidelines
If you want to observe new traffic statistics on a tunnel interface, you can use this command to clear old
statistics:
• If you do not specify any parameters, this command clears the statistics for all interfaces.
• If you specify only the tunnel keyword, this command clears the statistics for all tunnel interfaces.
• If you specify both the tunnel keyword and the number argument, this command clears the statistics
for the specified tunnel interface.
Examples
# Clear the statistics for the interface Tunnel 3.
<Sysname> reset counters interface tunnel 3
service
Use service to specify the service card for forwarding the traffic on the current tunnel interface.
Use undo service to restore the default.
Syntax
In standalone mode:
service slot slot-number
undo service slot
In IRF mode:
service chassis chassis-number slot slot-number
undo service chassis
Default
No service card is specified for the tunnel interface.
Views
Tunnel interface view
Default command level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where a card resides.
chassis chassis-number slot slot-number: Specifies a card in an IRF member device. The chassis-number
argument represents the IRF member ID of the device. The slot-number argument represents the slot
number of the card on the device. (In IRF mode.)