R3303-HP HSR6800 Routers Layer 3 - IP Services Command Reference

325
Default
No VAM client exists.
Views
System view
Default command level
2: System level
Parameters
client-name: Name for the VAM client, a case-insensitive string of 1 to 31 characters. Valid characters are
A to Z, a to z, 0 to 9 and the dot sign (.).
Usage guidelines
A VAM client applied to an interface cannot be removed directly.
Examples
# Create a VAM client named abc.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc]
Related commands
• display vam client
• vam client
vpn
Use vpn to specify the VPN to which a VAM client belongs.
Use undo vpn to remove the configuration.
Syntax
vpn vpn-name
undo vpn
Default
A VAM client does not belong to any VPN.
Views
VAM client view
Default command level
2: System level
Parameters
vpn-name: Name of the VPN that the VAM client belongs to, a case-insensitive string of 1 to 15
characters. Valid characters are A to Z, a to z, 0 to 9, and the dot sign (.).
Examples
# Specify that VAM client abc belongs to VPN 100.
<Sysname> system-view