R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

104
Ste
p
Command
1. Enter system view.
system-view
2. Configure a DNS mapping.
nat dns-map domain domain-name protocol pro-type ip global-ip
port global-port
Setting NAT connection limits
For more information about NAT connection limits, see Security Configuration Guide.
Displaying and maintaining NAT
IMPORTANT:
Clearing the NAT log buffer implies loss of all NAT logs. In general, HP recommends not using this
command.
Task Command Remarks
Display information about NAT
address pools.
display nat address-group [ group-number ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display all NAT configuration
information.
display nat all [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display NAT configuration
information.
display nat bound [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display DNS mapping
configuration information.
display nat dns-map [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the internal server
information.
display nat server [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display internal server group
information.
display nat server-group [ group-number ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display static NAT information.
display nat static [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display dynamic NAT entries on a
specific interface card. (In
standalone mode.)
display nat session [ vpn-instance
vpn-instance-name ] slot slot-number [ source
{ global global-address | inside
inside-address } ] [ destination dst-address ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display dynamic NAT entries on a
specific interface card of an IRF
member device. (In IRF mode.)
display nat session [ vpn-instance
vpn-instance-name ] chassis chassis-number
slot slot-number [ source { global
global-address | inside inside-address } ]
[ destination dst-address ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.