R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

170
Ste
p
Command Descri
p
tion
1. Enter system view.
system-view N/A
2. Create a DHCPv6 address
pool and enter its view.
ipv6 dhcp pool pool-number
Not configured by
default.
3. Configure the DHCPv6
server.
• Configure a static IPv6 address binding:
static-bind address
ipv6-address/addr-prefix-length duid duid
[ iaid iaid ] [ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
• Specify a subnet in the DHCPv6 address
pool:
network network-address/prefix-length
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
Use at least one
command.
Not configured by
default.
Configuring network parameters in a DHCPv6
address pool
Besides IPv6 prefixes and IPv6 addresses, you can configure other network parameters in a DHCPv6
address pool, such as DNS server address, client domain name, SIP server address and domain name,
and AFTR address.
You can configure up to eight DNS server addresses, one domain name, eight SIP server addresses, and
eight SIP server domain names in an address pool.
For more information about AFTR, see "Configuring tunneling."
To configure network parameters in a DHCPv6 address pool:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCPv6 address pool view.
ipv6 dhcp pool pool-number Not configured by default.
3. Configure a DNS server address.
dns-server ipv6-address
Optional.
Not configured by default.
4. Configure a domain name.
domain-name domain-name
Optional.
Not configured by default.
5. Configure the IPv6 address or
domain name of a SIP server.
sip-server { address ipv6-address |
domain-name domain-name }
Optional.
Not configured by default.
6. Specify the AFTR address.
ds-lite address ipv6-address
Optional.
Not specified by default.