R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

Configuration procedure

1. Configure Router A:

# Specify an IP address for GigabitEthernet 3/0/2.

<RouterA> system-view

[RouterA] interface GigabitEthernet 3/0/2

[RouterA-GigabitEthernet3/0/2] ip address 192.168.1.1 24

[RouterA-GigabitEthernet3/0/2]quit

2. Configure Router B:

# Specify an IP address for GigabitEthernet 3/0/1.

<RouterB> system-view

[RouterB] interface GigabitEthernet 3/0/1

[RouterB-GigabitEthernet3/0/1] ip address 192.168.1.2 24

[RouterB-GigabitEthernet3/0/1]quit

# Configure a static ARP entry that has IP address 192.168.1.1 and MAC address

00e0-fc01-0000.

[RouterB] arp static 192.168.1.1 00e0-fc01-0000

# Display information about static ARP entries.

[RouterB] display arp static

Type: S-Static D-Dynamic A-Authorized

IP Address MAC Address VLAN ID Interface Aging Type

192.168.1.1 00e0-fc01-0000 N/A N/A N/A S