R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

188
Configure dynamic domain name resolution and the domain name suffix com on Router that serves as a
DNS client so that Router can use domain name host to access the host with the domain name host.com
and the IPv6 address 1::1/64.
Figure 76 Network diagram
Configuration procedure
Before performing the following configuration, make sure Router and the host are accessible to each
other through available routes, and the IPv6 addresses of the interfaces are configured as shown Figure
76.
T
his configuration might vary with DNS servers. The following configuration is performed on a PC
running Windows Server 2003. Make sure the DNS server supports the IPv6 DNS function so that the
server can process IPv6 DNS packets, and the interfaces of the DNS server can forward IPv6 packets.
1. Configure the DNS server:
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in Figure 77.
b. Right
-click Forward Lookup Zones, select New Zone, and then follow the wizard to create a
new zone named com.
Figure 77 Creating a zone
c. On the DNS configuration page, right-click zone com, and select Other New Records.