R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

191
Figure 80 Adding a mapping between domain name and IPv6 address
2. Configure the DNS client:
# Enable dynamic domain name resolution.
<Router> system-view
[Router] dns resolve
# Specify the DNS server 2::2.
[Router] dns server ipv6 2::2
# Configure com as the DNS suffix.
[Router] dns domain com
Verifying the configuration
# Use the ping ipv6 host command on Router to verify that the communication between Router and the
host is normal and that the corresponding destination IP address is 1::1.
[Router] ping ipv6 host
Trying DNS resolve, press CTRL_C to break
Trying DNS server (2::2)
PING host.com (1::1):
56 data bytes, press CTRL_C to break
Reply from 1::1
bytes=56 Sequence=1 hop limit=126 time = 2 ms
Reply from 1::1