R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

305
For more information about commands interface tunnel, tunnel-protocol, and source, see Layer 3—IP
Services Command Reference.
For information about command ipsec profile, see Security Command Reference.
For more information about the ospf network-type and ospf dr-priority commands, see Layer 3—IP
Routing Command Reference.
For more information about VPN instance configuration, see MPLS Configuration Guide.
Configuring routing
To establish private networks across the public network by using DVPN, you must perform routing
configuration for devices in the private networks. In private networks of this type, route-related operations
such as neighbor discovery, route updating, routing table establishment, are done over DVPN tunnels.
Routing information is exchanged between hubs or between hubs and spokes. It is not exchanged
between spokes.
The routing protocol can be OSPF or BGP in a DVPN network.
• When the routing protocol is OSPF, set the network type of an OSPF interface to broadcast in a full
mesh network and P2MP in a hub-spoke network.
• When the routing protocol is BGP, configure IBGP between the hubs and spokes and configure the
hubs as the route reflectors in a full mesh network. Configure EBGP between the hubs and spokes
in a hub-spoke network.
For information about OSPF configuration on DVPN clients, and information about BGP, see Layer 3—IP
Routing Configuration Guide.
Displaying and maintaining DVPN
Task Command Remarks
Display address mapping
information about VAM clients
registered with the VAM server.
display vam server address-map
{ all | vpn vpn-name [ private-ip
private-ip ] } [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display statistics about VAM
clients registered with the VAM
server.
display vam server statistic { all |
vpn vpn-name } [ | { begin |
exclude | include }
regular-expression ]
A
vailable in any view.
Display registration information
about VAM clients.
display vam client { address-map |
fsm } [ client-name ] [ | { begin |
exclude | include }
regular-expression ]
A
vailable in any view.
Display information about DVPN
tunnels.
display dvpn session { all |
interface interface-type
interface-number [ private-ip
ip-address ] } [ | { begin | exclude
| include } regular-expression ]
A
vailable in any view.