R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

319
Public IP: 192.168.1.2
Session type: spoke-Hub
State: SUCCESS
Holding time: 0h 1m 50s
Input: 242 packets, 241 data packets, 1 control packets
231 multicasts, 0 errors
Output: 251 packets, 241 data packets, 7 control packets
225 multicasts, 0 errors
The output shows that Spoke 2 has established a permanent hub-spoke tunnel with Hub 1 and Hub 2
respectively in both VPN 1 and VPN 2.
The DVPN tunnel information of Spoke 1 and Spoke 3 is similar to that of Spoke 2.
# On Spoke 2, ping private address 10.0.5.1 of Spoke 3.
[Spoke2] ping 10.0.5.1
PING 10.0.5.1: 56 data bytes, press CTRL_C to break
Reply from 10.0.5.1: bytes=56 Sequence=1 ttl=254 time=5 ms
Reply from 10.0.5.1: bytes=56 Sequence=2 ttl=254 time=5 ms
Reply from 10.0.5.1: bytes=56 Sequence=3 ttl=254 time=5 ms
Reply from 10.0.5.1: bytes=56 Sequence=4 ttl=254 time=4 ms
Reply from 10.0.5.1: bytes=56 Sequence=5 ttl=254 time=4 ms
--- 10.0.5.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/4/5 ms
# Display the DVPN tunnel information of interface Tunnel 2 on Spoke 2.
[Spoke2] display dvpn session interface tunnel 2
Interface: Tunnel2 VPN name: 2 Total number: 3
Private IP: 10.0.2.1
Public IP: 192.168.1.1
Session type: spoke-Hub
State: SUCCESS
Holding time: 1h 10m 0s
Input: 451 packets, 450 data packets, 1 control packets
435 multicasts, 0 errors
Output: 453 packets, 447 data packets, 6 control packets
430 multicasts, 0 errors
Private IP: 10.0.2.2
Public IP: 192.168.1.2
Session type: spoke-Hub
State: SUCCESS
Holding time: 0h 1m 50s
Input: 242 packets, 241 data packets, 1 control packets
231 multicasts, 0 errors
Output: 251 packets, 241 data packets, 7 control packets