R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

320
225 multicasts, 0 errors
Private IP: 10.0.2.3
Public IP: 192.168.1.5
Session type: spoke-spoke
State: SUCCESS
Holding time: 0h 0m 0s
Input: 1 packets, 0 data packets, 1 control packets
0 multicasts, 0 errors
Output: 1 packets, 0 data packets, 1 control packets
0 multicasts, 0 errors
The output shows that a spoke-spoke tunnel has been established dynamically between Spoke 2 and
Spoke 3.
Hub-spoke DVPN configuration example
Network requirements
In the hub-spoke network shown in Figure 130, data is forwarded along hub-spoke tunnels. The primary
and secondary VAM servers manage and maintain information about the nodes. The AAA server takes
charge of VAM client authentication and accounting. With each being the backup of the other, the two
hubs perform data forwarding and routing information exchange.
Create a permanent tunnel between each hub-spoke pair.
Figure 130 Network diagram
Device Interface IP address Device Interface IP address
Hub 1 GE3/0/1 192.168.1.1/24 Spoke 1 GE3/0/1 192.168.1.3/24
Tunnel1 10.0.1.1/24 GE3/0/2 10.0.2.1/24
Hub 2 GE3/0
/
1 192.168.1.2
/
24 Tunnel1 10.0.1.3
/
24
Tunnel1 10.0.1.2/24 Spoke 2 GE3/0
/
1 192.168.1.4
/
24