R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

328
[SecondaryServer] display vam server address-map all
VPN name: 1
Total address-map number: 4
Private-ip Public-ip Type Holding time
10.0.1.1 192.168.1.1 hub 0H 8M 46S
10.0.1.2 192.168.1.2 hub 0H 14M 58S
10.0.1.3 192.168.1.3 spoke 0H 5M 9S
10.0.1.4 192.168.1.4 spoke 0H 1M 40S
The output shows that Hub 1, Hub 2, Spoke 1, and Spoke 2 all have registered their address mapping
information with the VAM servers.
# Display the DVPN tunnel information of Hub 1.
[Hub1] display dvpn session all
Interface: Tunnel1 VPN name: 1 Total number: 3
Private IP: 10.0.1.2
Public IP: 192.168.1.2
Session type: hub-Hub
State: SUCCESS
Holding time: 0h 1m 44s
Input: 101 packets, 100 data packets, 1 control packets
87 multicasts, 0 errors
Output: 106 packets, 99 data packets, 7 control packets
87 multicasts, 10 errors
Private IP: 10.0.1.3
Public IP: 192.168.1.3
Session type: hub-spoke
State: SUCCESS
Holding time: 0h 4m 32s
Input: 36 packets, 18 data packets, 18 control packets
10 multicasts, 0 errors
Output: 35 packets, 17 data packets, 18 control packets
11 multicasts, 0 errors
Private IP: 10.0.1.4
Public IP: 192.168.1.4
Session type: hub-spoke
State: SUCCESS
Holding time: 0h 3m 15s
Input: 20 packets, 0 data packets, 20 control packets
0 multicasts, 0 errors
Output: 20 packets, 6 data packets, 14 control packets
6 multicasts, 0 errors
The output shows that in VPN 1, Hub 1 has established a permanent tunnel with Hub 2, Spoke 1, and
Spoke 2, respectively. The DVPN tunnel information of Hub 2 is similar to that of Hub 1.