R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

329
# Display the DVPN tunnel information of Spoke 1.
[Spoke1] display dvpn session all
Interface: Tunnel1 VPN name: 1 Total number: 2
Private IP: 10.0.1.1
Public IP: 192.168.1.1
Session type: spoke-Hub
State: SUCCESS
Holding time: 1h 1m 22s
Input: 381 packets, 380 data packets, 1 control packets
374 multicasts, 0 errors
Output: 384 packets, 376 data packets, 8 control packets
369 multicasts, 0 errors
Private IP: 10.0.1.2
Public IP: 192.168.1.2
Session type: spoke-Hub
State: SUCCESS
Holding time: 0h 21m 53s
Input: 251 packets, 249 data packets, 1 control packets
230 multicasts, 0 errors
Output: 252 packets, 240 data packets, 7 control packets
224 multicasts, 0 errors
The output shows that in VPN 1, Spoke 1 has established a permanent hub-spoke tunnel with Hub 1 and
Hub 2, respectively. The DVPN tunnel information of Spoke 2 is similar to that of Spoke 1.
# On Spoke 1, ping private address 10.0.3.1 of Spoke 2.
[Spoke1] ping 10.0.3.1
PING 10.0.3.1: 56 data bytes, press CTRL_C to break
Reply from 10.0.3.1: bytes=56 Sequence=1 ttl=254 time=6 ms
Reply from 10.0.3.1: bytes=56 Sequence=2 ttl=254 time=54 ms
Reply from 10.0.3.1: bytes=56 Sequence=3 ttl=254 time=5 ms
Reply from 10.0.3.1: bytes=56 Sequence=4 ttl=254 time=6 ms
Reply from 10.0.3.1: bytes=56 Sequence=5 ttl=254 time=37 ms
--- 10.0.3.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 5/21/54 ms
# Display the DVPN tunnel information of Spoke 1.
[Spoke1] display dvpn session all
Interface: Tunnel2 VPN name: 2 Total number: 2
Private IP: 10.0.2.1
Public IP: 192.168.1.1
Session type: spoke-Hub
State: SUCCESS
Holding time: 1h 10m 0s