R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide
38
domain name, and the system adds the domain name suffix for name resolution. For more information
about DNS, see "Configuring IPv4 DNS."
To configure a domain name suffix in the DHCP address pool:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify a domain name suffix.
domain-name domain-name Not specified by default.
Configuring DNS servers for the client
To access hosts on the Internet through domain names, a DHCP client must contact a DNS server to
resolve names. You can specify up to eight DNS servers in a DHCP address pool.
To configure DNS servers in a DHCP address pool:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify DNS servers.
dns-list ip-address&<1-8>
No DNS server is specified by
default.
Configuring WINS servers and NetBIOS node type for the
client
A Microsoft DHCP client using NetBIOS protocol must contact a Windows Internet Naming Service
(WINS) server for name resolution. You can specify up to eight WINS servers for such clients in a DHCP
address pool.
Specify a NetBIOS node type for the clients to approach name resolution. There are four NetBIOS node
types:
• b (broadcast)-node—A b-node client sends the destination name in a broadcast message. The
destination returns its IP address to the client after receiving the message.
• p (peer-to-peer)-node—A p-node client sends the destination name in a unicast message to the
WINS server, and the WINS server returns the destination IP address.
• m (mixed)-node—An m-node client broadcasts the destination name. If it receives no response, it
unicasts the destination name to the WINS server to get the destination IP address.
• h (hybrid)-node—An h-node client unicasts the destination name to the WINS server. If it receives
no response, it broadcasts the destination name to get the destination IP address.
To configure WINS servers and NetBIOS node type in a DHCP address pool: