R3303-HP HSR6800 Routers Layer 3 - IP Services Configuration Guide

39
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify WINS servers.
nbns-list ip-address&<1-8>
Optional for b-node.
No WINS server is specified by
default.
4. Specify the NetBIOS node
type.
netbios-type { b-node | h-node
| m-node | p-node }
Not specified by default.
Configuring BIMS server information for the client
Perform this task to provide the branch intelligent management system (BIMS) server IP address, port
number, and shared key for the clients. The DHCP clients contact the BIMS server to get configuration files
and perform software update and backup.
To configure the BIMS server IP address, port number, and shared key in the DHCP address pool:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify the BIMS server IP
address, port number, and
shared key.
bims-server ip ip-address [ port
port-number ] sharekey [ cipher |
simple ] key
No BIMS server information is
specified by default.
Configuring gateways for the client
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify gateways.
gateway-list ip-address&<1-8>
No gateway is specified by
default.
You can specify up to eight
gateways in a DHCP address pool.
Configuring Option 184 parameters for the client with voice
service
To assign calling parameters to DHCP clients with voice service, you must configure Option 184 on the
DHCP server. For more information about Option 184, see "DHCP overview."