R3303-HP HSR6800 Routers MPLS Command Reference

92
Graceful Restart State: Ready
Restart Time: 200 sec Recovery Time: 150 sec
Interface GigabitEthernet2/1/2
Neighbor Addr: 80.2.1.1
SrcInstance: 832 NbrSrcInstance: 920
PSB Count: 1 RSB Count: 0
Hello Type Sent: REQ Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Not Ready
Restart Time: --- Recovery Time: ---
Table 37 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled interface.
Neighbor Addr: Neighbor address, in the format of X.X.X.X.
SrcInstance Instance of source Message ID.
NbrSrcInstance Instance of neighbor Message ID.
PSB Count Number of path state blocks.
RSB Count Number of reservation state blocks.
Hello Type Sent
Type of hellos sent to the neighbor: REQ, ACK, or
NONE.
Neighbor Hello Extension
State of hello extension: enabled or disabled. This
field is displayed only when hello extension is enabled
on the interface.
SRefresh Enable
State of summary refresh: YES for enabled and NO for
disabled.
Reliability Enable
State of the reliability function: YES for enabled and
NO for disabled.
Graceful Restart State
Neighbor's GR status: Not Ready, Ready, Restart, or
Recovery.
If this field is not supported, three hyphens (---) are
displayed.
Restart Time GR restart interval in seconds.
Recovery Time GR recovery interval in seconds.
display mpls rsvp-te psb-content
Use display mpls rsvp-te psb-content to display information about RSVP-TE PSB.
Syntax
display mpls rsvp-te psb-content ingress-lsr-id lspid tunnel-id egress-lsr-id [ | { begin | exclude | include }
regular-expression ]