R3303-HP HSR6800 Routers MPLS Command Reference

97
LSP ID: 1 Tunnel ID: 1
Upstream Label: -----
Token bucket rate: 0.00 Token bucket size: 0.00
Interface: Outgoing-Interface at the Egress
Tunnel Dest: 19.19.19.19 Ingress LSR ID: 29.29.29.29
LSP ID: 1 Tunnel ID: 1
Upstream Label: 3
Token bucket rate: 0.00 Token bucket size: 0.00
Table 40 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled Ethernet interface.
Tunnel Dest Tunnel destination, in the format of X.X.X.X.
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X.
Token Bucket rate Token bucket rate, a traffic parameter.
Token Bucket Size Token bucket size, a traffic parameter.
display mpls rsvp-te rsb-content
Use display mpls rsvp-te rsb-content to display information about RSVP-TE reservation state blocks
(RSBs).
Syntax
display mpls rsvp-te rsb-content ingress-lsr-id Ispid tunnel-id egress-lsr-id nexthop-address [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ingress-lsr-id: Ingress LSR ID.
lspid: Local LSP ID in the range of 1 to 65535.
tunnel-id: Tunnel ID in the range of 0 to 65535.
egress-lsr-id: Egress LSR ID.
nexthop-address: Next hop address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.