R3303-HP HSR6800 Routers MPLS Command Reference

103
Field Descri
p
tion
RecResvTearCounter Number of received ResvTear messages.
SendSrefreshCounter Number of transmitted Srefresh messages.
RecSrefreshCounter Number of received Srefresh messages.
SendAckMsgCounter Number of transmitted AckMsg messages.
RecAckMsgCounter Number of received AckMsg messages.
SendErrMsgCounter Number of transmitted errors.
RecErrMsgCounter Number of received errors.
RecReqFaultCounter Number of request failures.
BindFrrFaultCounter
Number of primary-to-bypass tunnel binding failures
in the FRR process.
display mpls static-cr-lsp
Use display mpls static-cr-lsp to display information about static CR-LSPs.
Syntax
display mpls static-cr-lsp [ lsp-name lsp-name ] [ egress | ingress | transit ] [ { include | exclude }
ip-address prefix-length ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
lsp-name lsp-name: Label switched path name comprising 1 to 15 characters.
egress: Displays static CR-LSPs taking the current device as the egress node.
ingress: Displays static CR-LSPs taking the current device as the ingress node.
transit: Displays static CR-LSPs taking the current device as a transit node.
include: Displays only CR-LSPs with the destination IP address specified by the ip-address prefix-length
arguments.
exclude: Displays only CR-LSPs with destination IP addresses other than the one specified by the
ip-address prefix-length arguments.
ip-address: IP address of the FEC.
prefix-length: IP address prefix length in the range of 0 to 32.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.