R3303-HP HSR6800 Routers MPLS Command Reference

107
Field Description
IGP Interior gateway protocol: OSPF or IS-IS.
Process-Id IGP process ID.
Area Area to which the router belongs.
Link-count
Total number of connected links belonging to a
particular IGP protocol process.
# Display the TEDB information for IGP area 1.
<Sysname> display mpls te cspf tedb area 1
Router Node Information for Area 1:
Id MPLS LSR-Id IGP Process-Id Area Link-Count
1 2.2.2.2 OSPF 100 1 1
2 3.3.3.3 OSPF 100 1 1
3 2.2.2.2 ISIS 100 Level-1 1
4 3.3.3.3 ISIS 100 Level-1 1
Network LSA Information for Area 1:
Id DR MPLS LSR-Id DR-Address IGP Process-Id Area Neighbor
1 3.3.3.3 20.1.1.2 OSPF 100 1 2.2.2.2
3.3.3.3
2 3.3.3.3 20.1.1.2 ISIS 100 Level-1 3.3.3.3
2.2.2.2
Table 48 Command output
Field Description
Id Number.
MPLS LSR-Id MPLS LSR ID, in dotted decimal notation.
IGP Interior gateway protocol: OSPF or IS-IS.
Process-Id IGP process ID.
Area Area to which the router belongs.
Link-Count
Total number of connected links belonging to a
particular IGP protocol process.
DR MPLS LSR-Id MPLS LSR ID of the DR.
DR-Address Interface address of the DR.
Neighbor MPLS LSR ID of the neighbor.
# Display the TEDB information for all nodes in prestandard DS-TE mode.
<Sysname> display mpls te cspf tedb node
MPLS LSR-Id: 1.1.1.1
IGP Type: OSPF Process Id: 100
MPLS-TE Link Count: 1
Link[1] :
Interface IP Address: 2.0.0.33, 2.0.0.35, 2.0.0.36,
Neighbor IP Address: 2.0.0.2, 2.0.0.42, 2.0.0.43,