R3303-HP HSR6800 Routers MPLS Command Reference

118
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about MPLS TE tunnels.
<Sysname> display mpls te tunnel statistics
Ingress: 0 Tunnels, 0 Tunnels Up, 0 CRLSPs Up
0 Modified, 0 In-Progress, 0 Failed
Transit: 0 Up
Egress : 0 Up
Table 57 Command output
Field Descri
p
tion
Ingress This device is the tunnel ingress.
Transit This device is a transit node on the tunnel.
Egress This device is the tunnel egress.
Modified
Number of CR-LSP tunnels that use this device as the
ingress and are in modified state.
In-Progress
Number of CR-LSP tunnels that use this device as the
ingress and are in in-progress state.
Failed
Number of CR-LSP tunnels that use this device as the
ingress and are in failed state.
display mpls te tunnel-interface
Use display mpls te tunnel-interface to display information about MPLS TE tunnel interfaces on this node.
Syntax
display mpls te tunnel-interface [ tunnel number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level