R3303-HP HSR6800 Routers MPLS Command Reference

124
Traffic adjustment
Interface: 100.0.0.1 (Tunnel0)
Type: Forwarding Adjacency State: Up
Neighbor ID: 100.0.0.2 Cost: 100
Configuration:
Neighbor Ip Address: 100.0.0.2
Cost : -10
Cost Type : Relative
Hold time : 10s
Table 60 Command output
Field Descri
p
tion
Interface Tunnel interface address and name.
Type
Approach to automatic route advertisement: IGP
shortcut or forwarding adjacency.
Neighbor ID Remote neighbor ID.
State State: up or down.
display tunnel-info
Use display tunnel-info to display information about tunnels.
Syntax
display tunnel-info { tunnel-id | all | statistics } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
tunnel-id: Specifies a tunnel ID in the range of 1 to FFFFFFFE. If a tunnel is specified, only information
about this tunnel will be displayed.
all: Display information about all tunnels.
statistics: Displays statistics about tunnels.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all tunnels.
<Sysname> display tunnel-info all