R3303-HP HSR6800 Routers MPLS Command Reference

157
Default
Both BC 0 and BC 1 is 0 kbps.
Views
Interface view
Default command level
2: System level
Parameters
bandwidth-value: Maximum reservable bandwidth of the link, or, the value of BC 0. It is in the range of
1 to 32000000 kbps.
bc1 bc1-bandwidth: Value of BC 1, in the range of 1 to 32000000 kbps.
Usage guidelines
The maximum reservable bandwidth of a link—the value of BC 0 (bandwidth-value)—cannot be greater
than the maximum bandwidth of the link, and the value of BC 1 (bc1-bandwidth) cannot be greater than
the value of BC 0 (bandwidth-value).
The bandwidth in this command is configured only for MPLS TE traffic.
Examples
# Set the maximum reservable bandwidth for MPLS TE in prestandard mode to 1158 kbps, and BC 1 to
200 kbps.
<Sysname> system-view
[Sysname] interface giabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mpls te max-reservable-bandwidth 1158 bc1 200
mpls te max-reservable-bandwidth mam
Use mpls te max-reservable-bandwidth mam to configure the maximum reservable bandwidth of the
MPLS TE link and the BCs in IETF DS-TE MAM model.
Use undo mpls te max-reservable-bandwidth mam to restore the default.
Syntax
mpls te max-reservable-bandwidth mam bandwidth-value { bc0 bc0-bandwidth | bc1 bc1-bandwidth |
bc2 bc2-bandwidth | bc3 bc3-bandwidth } *
undo mpls te max-reservable-bandwidth mam
Default
The maximum reservable bandwidth and each BC are 0 kbps.
Views
Interface view
Default command level
2: System level
Parameters
bandwidth-value: Maximum reservable bandwidth of the link, in the range of 1 to 32000000, in kbps.
bc0 bc0-bandwidth: Value of BC 0, in the range of 1 to 32000000, in kbps. By default, BC 0 is 0.