R3303-HP HSR6800 Routers MPLS Command Reference

183
MPLS L2VPN configuration commands
ccc interface in-label out-label
Use ccc interface in-label out-label to create a remote Circuit Cross Connect (CCC) connection between
CEs connected to different PEs.
Use undo ccc to delete a CCC connection.
Syntax
ccc ccc-connection-name interface interface-type interface-number in-label in-label-value out-label
out-label-value { nexthop ip-address | out-interface interface-type interface-number } [ control-word |
no-control-word ]
undo ccc ccc-connection-name
Views
System view
Default command level
2: System level
Parameters
ccc-connection-name: Specifies the CCC connection name, a case-insensitive string of 1 to 20 characters.
It is used for uniquely identifying a CCC connection on a PE.
interface interface-type interface-number: Specifies the interface connecting the local CE by its type and
number.
in-label in-label-value: Specifies the incoming label in the range of 16 to 1023.
out-label out-label-value: Specifies the outgoing label in the range of 16 to 1023.
nexthop ip-address: Specifies the IP address of the next hop.
out-interface interface-type interface-number: Specifies the outgoing interface by its type and number.
control-word: Enables the control word function.
no-control-word: Disables the control word function.
Usage guidelines
This command must be configured on both the local and remote PEs of a CCC connection.
A PE uses connection names to identify different CCC connections. A CCC connection can have different
names on different PEs.
If a P device is connected to a PE, you must configure static LSPs between them.
Only L2VPNs that use VC types of PPP, HDLC, FR DLCI, FR port mode, and ATM AAL5 transparent
transport support the control word function.
Only when the link that the outgoing interface connects is a point-to-point link, can you use the
out-interface keyword to specify the outgoing interface. If the link is not a point-to-point link but, for