R3303-HP HSR6800 Routers MPLS Command Reference

188
3.3.3.9 4 100 0 0 0 0 00:01:07 Active
Table 65 Command output
Field Descri
p
tion
BGP local router ID ID of the local BGP router.
Peers in established state
Number of peers with BGP sessions in the state of
established.
Peer IP address of the peer.
V BGP version that the peer is using.
AS AS number.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration that the BGP session is in the current status.
State
Status of the peer: Idle, Connect, Active, OpenSent,
OpenConfirm, and Established.
# Display detailed information about L2VPN peer 3.3.3.9 in the BGP routing table.
<Sysname> display bgp l2vpn peer 3.3.3.9 verbose
Peer: 3.3.3.9 Local: 2.2.2.9
Type: IBGP link
BGP version 4, remote router ID 3.3.3.9
BGP current state: Established, Up for 00:21:15
BGP current event: KATimerExpired
BGP last state: OpenConfirm
Port: Local - 179 Remote - 1034
Configured: Active Hold Time: 180 sec Keep Alive Time:60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Address family L2VPN: advertised and received
Received: Total 26 messages, Update messages 2
Sent: Total 28 messages, Update messages 2
Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 15 seconds
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured