R3303-HP HSR6800 Routers MPLS Command Reference

15
Configured Hello Timer : 15 Sec
Negotiated Hello Timer : 15 Sec
Configured Keepalive Timer : 45 Sec
Label Advertisement Mode : Downstream Unsolicited
Hello Message Sent/Rcvd : 591/1033 (Message Count)
-------------------------------------------------------------
Interface Name : GigabitEthernet2/1/2
LDP ID : 172.17.1.1:0 Transport Address : 172.17.1.1
Entity Status : Active Interface MTU : 1500
Configured Hello Timer : 15 Sec
Negotiated Hello Timer : 15 Sec
Configured Keepalive Timer : 45 Sec
Label Advertisement Mode : Downstream Unsolicited
Hello Message Sent/Rcvd : 586/1031 (Message Count)
-----------------------------------------------------------
Interface Name : Serial3/1/0
LDP ID : 172.17.1.1:0 Transport Address : 172.17.1.1
Entity Status : Active Interface MTU : 1500
Configured Hello Timer : 15 Sec
Negotiated Hello Timer : 15 Sec
Configured Keepalive Timer : 45 Sec
Label Advertisement Mode : Downstream Unsolicited
Hello Message Sent/Rcvd : 539/452 (Message Count)
-------------------------------------------------------------
Table 6 Command output
Field Descri
p
tion
LDP ID
LDP identifier. It identifies the label space of an LSR.
An LDP ID consists of the LSR ID and label space ID. Now, the
label space ID can only be 0, which indicates that the entire LSR
uses one label space.
Transport Address
LDP transport address. The device uses this address to establish
a TCP connection with an LDP peer.
Entity Status Entity status, Active or Inactive.
Hello Message Sent/Rcvd Counts of hello messages sent/received on the interface.
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs established by LDP.