R3303-HP HSR6800 Routers MPLS Command Reference

240
Views
Any view
Default command level
1: Monitor level
Parameters
vsi-name: Specifies the name of the VPLS instance, a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
blackhole: Specifies the black hole MAC forwarding entries.
dynamic: Specifies the dynamic MAC forwarding entries.
static: Specifies the static MAC forwarding entries.
count: Specifies the number of MAC forwarding entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MAC address table.
<Sysname> display mac-address vsi
MAC ADDR STATE VSI ID PEER IP AGING TIME
0000-0000-000a dynamic 1 Vlan 300 AGING
0000-0000-0009 dynamic 1 LinkId 1 AGING
--- 2 mac address(es) found ---
# Display the total number of entries in the MAC address table.
<Sysname> display mac-address vsi count
2 mac address(es) found
Table 94 Command output
Field Descri
p
tion
MAC ADDR MAC address.
STATE Status of the MAC address.
MACTYPE MAC address type of the VPLS instance.
Vsilndex VSI index.
LINK ID Link ID.
VSI ID ID of the VPLS instance.
PEER IP
IP address of the peer in the VPLS instance. For a
device on the private network side, it is the ID of the
VLAN to which the device belongs. For a device on
the public network side, it is the PW ID.