R3303-HP HSR6800 Routers MPLS Command Reference

18
Table 8 Command output
Field Descri
p
tion
Peer-ID
LDP identifier of the peer. For a description of the LDP identifier,
see the LDP ID field in Table 6.
Discovery-Source Interface that discovers the peer.
# Display detailed information about all peers.
<Sysname> display mpls ldp peer verbose
LDP Peer Information in Public network
---------------------------------------------------------------
Peer LDP ID : 172.17.1.2:0
Peer Max PDU Length : 4096 Peer Transport Address : 172.17.1.2
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : GigabitEthernet2/1/1
------------------------------------------------------------
Peer LDP ID : 168.1.1.1:0
Peer Max PDU Length : 4096 Peer Transport Address : 168.1.1.1
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : GigabitEthernet2/1/2
-------------------------------------------------------------
Peer LDP ID : 100.10.1.1:0
Peer Max PDU Length : 4096 Peer Transport Address : 100.10.1.1
Peer Loop Detection : Off Peer Path Vector Limit : 0
Peer FT Flag : Off Peer Keepalive Timer : 45 Sec
Recovery Timer : ---- Reconnect Timer : ----
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source : Serial3/1/0
------------------------------------------------------------
Table 9 Command output
Field Descri
p
tion
Peer LDP ID
LDP identifier of the peer. For a description of the LDP identifier,
see the LDP ID field in Table 6.
Peer FT Flag
Indicates whether the peer has enabled the GR function for the
session. If the L bit in the FT Session TLV is set to 1, it indicates
that the GR function is enabled for the session.
Peer Discovery Source Interface that discovers the peer.