R3303-HP HSR6800 Routers MPLS Command Reference

287
Negotiated: send
Connect-interface has been configured
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 112 Command output
Field Descri
p
tion
Peer IP address of the peer.
Local IP address of the local router.
Type BGP type.
BGP version Version of BGP that the peer runs.
remote router ID Router ID of the remote router.
BGP current state Current status of BGP.
Up for Duration since the peer is established.
BGP current event Current event of the peer.
BGP last state
State that BGP was in before transitioning to the
current status.
Port Local and remote BGP port numbers.
Configured
Settings of the local timers, including the active hold
interval and keepalive interval.
Received Received active hold interval.
Negotiated Negotiated active hold interval.
Peer optional capabilities Optional capabilities of the peer.
Peer support bgp multi-protocol extended The peer supports multiprotocol extension.
Peer support bgp route refresh capability The peer supports route refresh capability.
Address family IPv4 Unicast IPv4 unicast family capability.
Address family VPNv4 IPv4 address group VPNv4 capability.
Received
Total number of received messages and the number of
received update messages.
Sent
Total number of sent messages and the number of sent
update messages.
Maximum allowed prefix number
Maximum number of routes that can be learned from
the peer.
Threshold
Threshold for warning. When the percentage of the
number of the received route prefixes to the maximum
number of routes supported reaches this value, the
device generates a prompt.
Optional capabilities Local optional capabilities.
ORF advertise capability based on prefix (type 64):
The ORF address prefix capability is supported. The
capability value is 64.