R3303-HP HSR6800 Routers MPLS Command Reference

303
Views
Any view
Default command level
1: M on i to r vi ew
Parameters
vpn-instance-name: Specifies the name of the VPN instance, a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 80 characters.
Examples
# Display information about the LDP instance named vpn1.
<Sysname> display mpls ldp vpn-instance vpn1
LDP Global Information
--------------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information
--------------------------------------------------------------------
Instance ID : 1 VPN-Instance : vpn1
Instance Status : Active LSR ID : 1.1.1.9
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
Table 122 Command output
Field Descri
p
tion
Protocol Version Version of the LDP protocol.
Neighbor Liveness Neighbor liveness timer of LDP GR.
Graceful Restart Indicates whether GR is enabled for LDP.
FT Reconnect Timer FT reconnect timer of LDP GR.
MTU Signaling
Indicates whether MTU signaling is supported. The device
does not support MTU signaling.
Recovery Timer Recover timer of LDP GR.
VPN-Instance Name of the LDP-enabled VPN instance.
Loop Detection Indicates whether loop detection is enabled.