R3303-HP HSR6800 Routers MPLS Command Reference

355
Usage guidelines
If you do not specify any parameter, the command displays brief information about all peers.
Examples
# Display brief information about all BGP VPNv6 peers.
<Sysname> display bgp vpnv6 all peer
BGP local router ID : 192.168.1.40
Local AS number : 200
Total number of peers : 1 Peers in established state : 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
192.168.1.40 100 24 29 0 1 00:02:10 Established
Table 127 Command output
Field Descri
p
tion
Peer IP address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration of the BGP session in the current state.
State Current state of the peer.
# D i s pl a y d et a i l e d in f o rm a t io n a b ou t t h e B G P V P N v 6 p e er 1.1.1.1.
<Sysname> display bgp vpnv6 all peer 1.1.1.1 verbose
Peer: 1.1.1.1 Local: 2.2.2.2
Type: IBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h46m01s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1039 Remote - 179
Configured: Active Hold Time: 180 sec Keepalive Time:60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Address family VPNv6: advertised and received
Received: Total 52 messages, Update messages 2
Sent: Total 65 messages, Update messages 5