R3303-HP HSR6800 Routers MPLS Command Reference

372
Views
VPN instance view
Default command level
2: System level
Examples
# Enter IPv6 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] ipv6-family
[Sysname-vpn-ipv6-vpn1]
peer enable (BGP-VPNv6 subaddress family view)
Use peer enable to enable a peer or peer group for an address family and enable the exchange of BGP
routing information for the address family.
Use undo peer enable to disable the capability.
Syntax
peer ip-address enable
undo peer ip-address enable
Default
Only IPv4 routing information is exchanged between BGP peers/peer groups.
Views
BGP-VPNv6 subaddress family view
Default command level
2: System level
Parameters
group-name: Specifies the name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.
Examples
# Configure peer 1.1.1.1 and enable the peer for the BGP-VPNv6 subaddress family.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 as-number 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] peer 1.1.1.1 enable
peer filter-policy (BGP-VPNv6 subaddress family view)
Use peer filter-policy to apply a filtering policy to a peer or peer group.
Use undo peer filter-policy to remove the configuration.