R3303-HP HSR6800 Routers MPLS Command Reference

29
ASBR LSP 0 0 0 0
BGP IPV6 LSP 0 0 0 0
-------------------------------------------------------------------------
LSP 8 2 2 4
CRLSP 0 0 0 0
Table 16 Command output
Field Descri
p
tion
Ingress Number of LSPs taking the current LSR as ingress.
Transit Number of LSPs taking the current LSR as transit LSR.
Egress Number of LSPs taking the current LSR as egress.
display mpls nhlfe
Use display mpls nhlfe to display information about NHLFE entries.
Syntax
In standalone mode:
display mpls nhlfe [ token ] [ verbose ] [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
In IRF mode:
display mpls nhlfe [ token ] [ verbose ] [ chassis chassis-number slot slot-number ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
token: Specifies an NHLFE entry index. The value range for the token argument is 0 to 65535.
verbose: Displays the detailed information.
slot slot-number: Displays the NHLFE entries on a card. The slot-number argument specifies the number
of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays the NHLFE entries on a card of an IRF member device.
The chassis-number argument represents the IRF member ID of the device, and the slot-number argument
represents the slot number of the card on the device. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.