R3303-HP HSR6800 Routers MPLS Command Reference

89
Hello interval: 3 sec Max Hello misses: 3
Path and Resv message refresh interval: 30 sec
Path and Resv message refresh retries count: 3
Blockade Multiplier: 4
Graceful Restart: ENABLE
Restart Time: 200 sec Recovery Time: 150 sec
Table 34 Command output
Field Descri
p
tion
LSR ID Label switched Router ID, in the format of X.X.X.X.
Resv Confirmation Request Reserved confirmation request.
RSVP Hello Extension State of the hello mechanism: enabled or disabled.
Hello Interval Hello interval, in seconds.
Max Hello misses
Maximum number of consecutive hello losses before a
neighbor is considered dead.
Path and Resv message refresh interval
Path and reservation message refresh interval, in
seconds.
Path and Resv message refresh retries count Number of Path and Resv message retransmissions.
Blockade Multiplier Blockade multiplier.
Graceful Restart State of GR: enabled or disabled.
Restart Time GR restart interval in seconds.
Recovery Time GR recovery interval in seconds.
# Display the RSVP-TE configuration on interface GigabitEthernet 2/1/1.
<Sysname> display mpls rsvp-te interface giabitethernet 2/1/1
Interface GigabitEthernet2/1/1
Interface state: UP BFD feature: ENABLE
Total-BW: 80 Used-BW: 20
Hello configured: NO Num of Neighbors: 1
SRefresh feature: ENABLE SRefresh Interval: 30sec
Authentication: DISABLE Reliability configured: NO
Retransmit Interval: 500msec Increment Value: 1
Table 35 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled interface.
Interface state Physical interface state.
BFD feature State of BFD: enabled or disabled.
Total-BW Total bandwidth (in kbps)
Used-BW Used bandwidth (in kbps)
Hello configured Whether the hello mechanism is configured.
Num of Neighbors Number of neighbors connected to the interface.