R3303-HP HSR6800 Routers MPLS Configuration Guide

124
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL GE2/1/1/-
[RouterE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
3.3.3.3/32 1024/3 POS5/1/0/POS5/1
Execute the display mpls te tunnel command on each router. You can see that two MPLS TE tunnels
are traversing Router B and Router C.
[RouterA] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 -/GE2/1/1 Tunnel4
[RouterB] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/1/GE2/1/2 Tunnel4
2.2.2.2:1 3.3.3.3 -/POS5/1/0 Tunnel5
[RouterC] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/2/GE2/1/1 Tunnel4
2.2.2.2:1 3.3.3.3 POS5/1/0/- Tunnel5
[RouterD] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/1/- Tunnel4
[RouterE] display mpls te tunnel
LSP-Id Destination In/Out-If Name
2.2.2.2:1 3.3.3.3 POS5/1/0/POS5/1 Tunnel5
Execute the display mpls lsp verbose command on Router B. You can see that the bypass tunnel is
bound with the protected interface GigabitEthernet 2/1/2 and is unused.
[RouterB] display mpls lsp verbose
-------------------------------------------------------------------
LSP Information: RSVP LSP
-------------------------------------------------------------------
No : 1
IngressLsrID : 1.1.1.1
LocalLspID : 1
Tunnel-Interface : Tunnel4
Fec : 4.4.4.4/32
Nexthop : 3.1.1.2
In-Label : 1024
Out-Label : 1024
In-Interface : GigabitEthernet2/1/1
Out-Interface : GigabitEthernet2/1/2
LspIndex : 4097
Tunnel ID : 0x22001
LsrType : Transit
Bypass In Use : Not Used