R3303-HP HSR6800 Routers MPLS Configuration Guide

148
------------------------------------------------------------------
No : 2
VrfIndex : vpn1
Fec : 192.168.1.0/24
Nexthop : 192.168.1.1
In-Label : 1024
Out-Label : NULL
In-Interface : ----------
Out-Interface : ----------
LspIndex : 8193
Tunnel ID : 0x0
LsrType : Egress
Outgoing Tunnel ID : 0x0
Label Operation : POP
------------------------------------------------------------------
LSP Information: LDP LSP
------------------------------------------------------------------
No : 3
VrfIndex :
Fec : 2.2.2.2/32
Nexthop : 127.0.0.1
In-Label : 3
Out-Label : NULL
In-Interface : POS5/1/1
Out-Interface : ----------
LspIndex : 10241
Tunnel ID : 0x0
LsrType : Egress
Outgoing Tunnel ID : 0x0
Label Operation : POP
No : 4
VrfIndex :
Fec : 3.3.3.3/32
Nexthop : 10.0.0.2
In-Label : NULL
Out-Label : 3
In-Interface : ----------
Out-Interface : POS5/1/1
LspIndex : 10242
Tunnel ID : 0x22000
LsrType : Ingress
Outgoing Tunnel ID : 0x0
Label Operation : PUSH
# Execute the display interface tunnel command on PE 1. The output shows that traffic is forwarded
along the CR-LSP of the TE tunnel.
[PE1] display interface tunnel 1
Tunnel1 current state: UP