R3303-HP HSR6800 Routers MPLS Configuration Guide

10
Protocols
• RFC 3031, Multiprotocol Label Switching Architecture
• RFC 3032, MPLS Label Stack Encoding
• RFC 5036, LDP Specification
MPLS configuration task list
Task Remarks
Enabling the MPLS function Required.
Configuring a static LSP Required.
Use either the static
or dynamic LSP
configuration
method.
Establishing dynamic LSPs
through LDP
Configuring MPLS LDP capability Required.
Configuring local LDP session
parameters
Optional.
Configuring remote LDP session
parameters
Optional.
Configuring PHP Optional.
Configuring the policy for triggering
LSP establishment
Optional.
Configuring the label distribution
control mode
Optional.
Configuring LDP loop detection Optional.
Configuring LDP MD5 authentication Optional.
Configuring LDP label filtering Optional.
Maintaining LDP sessions
Configuring BFD for MPLS LDP Optional.
Resetting LDP sessions Optional.
Managing and optimizing MPLS
forwarding
Configuring MPLS MTU Optional.
Configuring a TTL processing mode
for an LSR
Optional.
Sending back ICMP TTL exceeded
messages for MPLS TTL expired
packets
Optional.
Configuring LDP GR Optional.
Configuring LDP NSR Optional.
Configuring MPLS statistics
collection and reading
Configuring MPLS statistics collection
and readi
ng (method 1)
Optional.
Configuring MPLS statistics collection
and reading for specific LSPs (method
2)
Optional.
Inspecting LSPs Configuring MPLS LSP ping Optional.