R3303-HP HSR6800 Routers MPLS Configuration Guide

194
[CE2] interface serial 2/1/0
[CE2-Serial2/1/0] isis enable 1
[CE2-Serial2/1/0] quit
[CE2] interface serial 2/1/1
[CE2-Serial2/1/1] isis enable 1
[CE2-Serial2/1/1] quit
Verifying the configuration:
# Display VC information on PE 1. The output shows that two VCs have been established, one up
and one blocked.
<PE1> display mpls l2vc
Total ldp vc : 2 1 up 0 down 1 blocked
Transport Client Service VC Local Remote
VC ID Intf ID State VC Label VC Label
20 S2/1/0 -- up 1026 1033
30 S2/1/0 -- blocked 1027 1050
# Display the detailed VC information on PE 1. The output shows that two VCs have been
established, one up and one blocked.
<PE1> display mpls l2vc interface vlan-interface 10
***VC ID : 20
VC State : up
Destination : 2.2.2.2
Client Intf : Serial2/1/0 is up
Service ID : --
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1026
Remote VC Label : 1033
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0xd2009
Backup VC
***VC ID : 30
VC State : blocked
Destination : 3.3.3.3
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1027
Remote VC Label : 1050
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0xd2001
# Display VC information on PE 2. The output shows that a VC has been established on PE 2.
<PE2> display mpls l2vc
Total ldp vc : 1 1 up 0 down 0 blocked
Transport Client Service VC Local Remote